STARTRC DJI Mavic Mini 2 Signal Booster Yagi Antenna Remote Controller Range Extender Amplifier

New Arrival Yagi Antenna

1. It is new arrival Yagi Antenna, special design for DJI Mini 2/Mavic Air 2 Drone Remote controller.
2. It made of high quality copper material, and the signal extender range effect is better, conversion rate will be higher.
3. Package Include: 1x 5.8Ghz Yagi Antenna

STARTRC DJI Mavic Mini 2 Signal Booster Yagi Antenna Remote Controller Range Extender Amplifier For DJI Mavic Air 2 2.4/5.8Ghz

Brand:STARTRC Features:Can increase the signal Weight: 12g Size:72*65mm Material: ABS+Prue aluminum Suitable for: Mavic Air 2/ Mavic Mini 2 Drone Remote Controller Package Include: 1x 5.8Ghz / 2.4Ghz Signal Booster Antenna
1.STARTRC Mavic Air
2 Yagi antenna signal booster (2.4GHZ 5.8GHZ) 2.Suitable for Mavic Air 2/DJI Mini 2 Remote Controller.
3.Signal is everything, aerial photography is no longer NG
4.Enhance antenna signal and extend remote control distance.
5.By concentrating the RF signals together, it is like adding a reflector to the bulb, which could illuminate farther, the external Yagi antenna could make the signal more concentrated, and naturally you also could fly more farther!
6.Yagi-Uda antenna principle
7.Reduce accidents and make flying safer
8.The signal is obviously enhanced when remote controller is attached to the Yagi-UDA antenna, and the remote controller signal has better directivity. The antenna also has some anti-interference ability.
9.stronger and more stable signal help reduce the crash chance or other risks.On the same signal interference intensity of the flight environment, the flight distance could be increased by 50-500 meters.The real-time image transmitted is clearer and stable.
10.at an altitude of nearly 500 meters,，the signal is still strong.
11.Made of ABS and aluminum
12.With anodic oxidation treatment, it has nice looking and has better wear resistance and corrosion resistance.
13.When remote controller attaches the Yagi antenna, the signal will have unidirectional directivity. The antenna shall be pointed toward the controlled drone. Don’t obstruct remote controller, or fly in areas with strong interference.
14.Compact size, easy to carry
15.Only 9g, easy for carrying or storing.
16.Easy to use, no tedious steps required
17.Easy to install and disassemble, no need to change the control, plug and use in any time, non-destructive installation design, do not worry about damaging the remote control.
18.Take out the Mavic air 2 remote control and unfold it.
19.Align the Yagi antenna with the lower end of the remote control antenna assembly and buckle up with a little force. The dots inside the Yagi antenna are aligned with the slot of the remote control antenna assembly.
20.Also on the other side, align the Yagi antenna with the lower end of the remote control antenna assembly and buckle up with a little force. 21.Finally, connect your phone.

4.7-5.5 inch Remote Controller Sun Hood

Feature: Quick release controller hood,Durable, eye shading, prevent dizziness, prevent metering High quality PU skin hot-pressing ,inner lining is a soft light absorbing material The bottom has a octopus foot sucker to firmly absorb the mobile phone, easily installed and removed, and protect the back of cellphone. Impeccable upgrade, foldable and lightweight sunshade hood is very easy to use and convenient to store Excellent technology Waterproof upgrade Wide Compatibility For 4.7-5.5 inch Mobile Phone. Widely Compatible With DJI Phantom 2, 3 4, Inspire 1 , 2( Not fit for Phantom 3 standard). For Parrot ANAFI / DJI Mavic / Spark / Mavic 2 Pro / Mavic 2 ZOOM / Mavic Air Controller ./ Mavic Mini / FIMI X8 SE For DJI Mini 2 and Mavic Mini Drone. Package included 1 x Sunshade

Damping Landing Gear Folating Kit

1. The Landing Gear Light weight, portable, easy to carry and install, to protect your Mavic Mini 2 perfectly. 2. Highly Stability, Eliminates Rocking, Allows Smoother Landings, and allows for a smooth landing on a variety of unstable surfaces. 3. Landing Gear can use your mavic mini 2 drone flying on the river and lakes, you can use landing gear take off and land on the lake,no worry about your drone sinking. 4. Buoyant rods can be installed to allow the Mavic Mini to take off and land on the water,it can allow let you play in the water or sea. 5. Special Design fit for DJI Mini 2/Mavic Mini Drone. Note : Don't go to have wave of water of place, otherwise there will be danger of turning over, to fly in calm water place. Package Include: 1x Landing Gear Float for DJI Mavic Mini 2

Foldable Landing Gear

【Light-weight & Good protection】 Only 10g Lightweight design does not effect flying。And this landing gear can raise the drone up to 15mm above the dirt, sand, grass, provide good protection for drone camera and gimbal. 【Designed for Mavic Mini Specially】 Designed for Mavic Mini specially and fits the drone perfectly. Allow to land stably, and protect the drone body and gimal camera to avoid damages when landing. 【Easy Install or Remove】 Special quick-release and foldable design, Easy to install or remove it. 【Special Design for】DJI Mini 2 and Mavic Mini Drone. 【Package Included】1x Foldable Landing Gear

Upgrade Yagi Antenna 5.8Ghz

1.Enhanced version 5.8GHz Yagi-Uda antenna for DJI MINI 2 2.Combination application of two devices makes the signal stronger. 3.Yagi-uda antenna size for drone landing gear 4.Yagi-uda antenna size for remote controller 5.NG Stronger signal provides more wonderful flight 6.According to testings, the remote-controlling distance can increase 1500 meters ( the data was obtained under the condition of no interference in the field. The test results are for reference only). 7.The antenna can focus radio-frequency signal together, and make signal more centralized. The remote-controlling distance will be farther correspondingly. 8.Yagi-Uda antenna principle 9.The signal is obviously enhanced when remote controller is attached to the Yagi-UDA antenna, and the remote controller signal has better directivity. The antenna also has some anti-interference ability. stronger and more stable signal help reduce the crash chance or other risks.image is stable,clearer real-time image transmission. 11.Installation does not affect flight and landing. 12.Yagi-uda antenna features unidirectional directivity. The antenna on the transmitter should point to the drone to avoid blocking the transmitter and flying in the serious interference area. The flying effect is better when the tail of the drone points to the transmitter. 13.When the remote controlled flight altitude is up to 3000 meters, the signal is still stronger.The stronger the signal, the farther the signal transmits, the farther the remote controlled distance. 14.Small size and easy to carry 15.The lightweight design will not bring heavy load to the drone. 16.*When installing the Yagi-uda antenna on the landing gear, please keep it level with the drone 17.Using ABS+ pure aluminum, anodized, enhanced texture, wear resistance, corrosion resistance. 18.Easy to use, no tedious steps required 19.Easy to install and disassemble, no need to change the control, non-destructive installation design, do not worry about damaging the remote control. 20.As the picture shown, take out the antenna and silicone mount, align the protruding part of the silicone mount to the vacant part of the antenna groove. 21.First, clip one side of the silicone mount into the reserved hole of the antenna, and then press the other side upward to fix it. 22.Take out the drone and clip the Yagi-Uda antenna to the landing gear of the drone. 23.Fix the Yagi-Uda antenna on the transmitter according to buckling the antenna of the transmitter. Package Include: 1x 5.8Ghz Signal Booster Antenna Kit

Night flying head lights for DJI Mini 2/Mavic Mini

1. The eye light adopts three working modes
Constant light-fast flashing-sos signal, in line with different scene switching. (In any state, long press for 3S to turn off the power, no need to press frequently, and extend the life of the keys.)

Warm reminder: Warm reminder: When the voltage is too low, the LED light will automatically turn off and shut down. Please charge it in time.

2. The eye light is powered by a LIR2032 rechargeable battery. It is shipped with a USB to Android charging cable, which can be used endlessly. It takes about 1 hour when it is fully charged, and the use time varies in different modes. In the always-on mode, the time is about 2 hours. In other modes, the time becomes longer.

3. Remove the dust plug of the aircraft before using the eye light. Three types of dustproof stickers are provided for users to replace and use.

4. Fits just right with the mini/mini 2 aircraft, beautiful and generous, and does not take up space. (Here can see if it affects storage after installation)


Product parameters: Use time: Standby power consumption: <20uA.
USB charging: 5V.
LIR2032: 3.6v

Key function: short press: mode switching, the sequence is "mode 1-mode 2-mode 3-shutdown" cycle.
Long press: Turn off in working mode.

Instructions:
One time: on
Twice: flash
Three times: SOS
Four times: turn off
Press and hold the button for 3 seconds: turn off

Warning Strobe Lights for DJI Mini 2/Mavic Mini

Can be used for night flight;
Be able to identify where your drone is, even in a dark environment;
Increase the fun of flying at night;
Fit for DJI Mini 2/ Mavic Air 2/Mavic mini drone.